The multipurpose trailer
The rausschwärmer is a multipurpose trailer manufactured at the Posch-Factory in Leibnitz, Austria. The vehicle frame is made from galvanised steel and mounted on a double axle . However the upper consists only of aluminium and stainless steel components. The left side of the trailer offers a fold wing that contains a bed with tent cover protection. If tent and mattress are removed the platform of this wing can also be used for other purposes like a presentation table. Roof and tent cover are made from marine grade fabrics and strong PVC Materials. Within the right wing of multipurpose trailer you find a fold out workspace or kitchen to be used from inside or outside. The inside front area offers a couch with storage compartments and access to the electric equipment. Diesel heater, solar power, 2 USB plugs, and 12V outlet, 230V outlets are available as options.
Option 1: Tare weight: 740kg
Maximum load: 860kg
Permissible total weight: 1.600kg
Option 2: Tare weight: 740kg
Maximum load: 1260kg
Permissible total weight: 2.000kg
Max speed (depending on local regulations): 100km
You don’t necessarily need a specially strong car for this trailer, as it’s own weight is very low. If mainly depends on how much load you like to put inside of the trailer while driving.
Also a special driving licence for trailers is not required if you keep your registered max weight of your towing vehicle combined with the one of the trailer beneath a total of 3.500kg. This is possible with option-1, but it starts with the registered values of your towing vehicle. Look at the value in your vehicle documents for F1 and F2. This value added to the value of the same lines in the trailer’s documents must not exceed 3,500kg. To do this, you must register your trailer with a lower gross vehicle weight rating than the maximum possible. This information is a guideline, but not a guarantee, as the legal regulations vary from country to country and are constantly changing as you read these lines….
